LX Forum - Dodge Charger | Dodge Challenger | Dodge Magnum | Chrysler 300 Forum - View Single Post

**MoPower** · 12-14-2011, 01:56 PM

The next step is to connect al the dots (just like they made you do in Math class on a graph. I'm gonna use 2" tape, because the width helps me keep a straight line. The idea is to cross all the measurment hash marks keeping is as straight as possible

Now, I spray it with paint to mark the spot to cut and cut it off with an air powered hack saw. I'm now ready to install the liner back into the car and mount the wide body so i can design the LAST piece of this project - Moulds should be in full production by the end of the year!!

Here I'm taking a template off the driver's side so I know exactly where to cut the sheet metal on the other side. These Template will come with the Tub Kit if you get that option.

12-14-2011, 01:56 PM	#20
MoPower Preferred Vendor Join Date: Mar 2010 Location: Miami Name: Mo Age: 57 Posts: 88 Car Model: Briliant Black Charger R/T Year: 2007 Engine: 5.7L Hemi	The next step is to connect al the dots (just like they made you do in Math class on a graph. I'm gonna use 2" tape, because the width helps me keep a straight line. The idea is to cross all the measurment hash marks keeping is as straight as possible Now, I spray it with paint to mark the spot to cut and cut it off with an air powered hack saw. I'm now ready to install the liner back into the car and mount the wide body so i can design the LAST piece of this project - Moulds should be in full production by the end of the year!! Here I'm taking a template off the driver's side so I know exactly where to cut the sheet metal on the other side. These Template will come with the Tub Kit if you get that option.