LX Forum - Dodge Charger | Dodge Challenger | Dodge Magnum | Chrysler 300 Forum - View Single Post

**MoPower** · 12-14-2011, 01:44 PM

Since we are gonna use the TUB kit on this car, now it's time to cut the passenger side wheel well liner to match the other side. Simple measurements from specific locations and a grease pencil is all you need. Note that all measurements are taken by measuring a STRAIGHT DISTANCE (first picture) as opposed to making the tape measure conform with the curved shape of the wheel well. In the second picture, you can barely see the white grease pencil line at the top of that inset mounting flange.

12-14-2011, 01:44 PM	#19
MoPower Preferred Vendor Join Date: Mar 2010 Location: Miami Name: Mo Age: 57 Posts: 88 Car Model: Briliant Black Charger R/T Year: 2007 Engine: 5.7L Hemi	Since we are gonna use the TUB kit on this car, now it's time to cut the passenger side wheel well liner to match the other side. Simple measurements from specific locations and a grease pencil is all you need. Note that all measurements are taken by measuring a STRAIGHT DISTANCE (first picture) as opposed to making the tape measure conform with the curved shape of the wheel well. In the second picture, you can barely see the white grease pencil line at the top of that inset mounting flange.