Welcome to the LX Forum - Dodge Charger | Dodge Challenger | Dodge Magnum | Chrysler 300 Forum.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

<<<<<< Register to remove these ads >>>>>>


Go Back   LX Forum - Dodge Charger | Dodge Challenger | Dodge Magnum | Chrysler 300 Forum > LX Forum - Modifications > Wheels, Tires, Suspensions & Brakes > AWD Threads


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-03-2010, 10:36 PM   #1
 
Gabe's Avatar
Gabe
Senior Member
 
Join Date: Feb 2010
Location: Heaven
Name: Gabe
Age: 49
Posts: 122

Car Model: Mustang
Year: 2013
Engine: 5.0L
Default What's different about AWD ?
Here's the answer :


AWD models have a 55mm factory offset on the 18x7.5 wheels, whereas the RWD models use offsets in the 15-25mm range.

The AWD models have the front brake calipers mounted on the front of the rotor, the RWD models have the calipers on the back side of the front rotors

The stock AWD suspension sits 1" higher than corresponding RWD models.

This can be "fixed" via Eibach springs (2" total drop after settling), KW coilover kits, and the soon-to-be-released CW Motorsports coilover kit, which I will be looking into getting as soon as some are on the road and people are happy with them. The coilover kits are adjustable for drop and the CW will also be adjustable for ride smoothness (not sure if the KW is)

The car's floorpan, the engine oil pan, and front struts are also different on the AWD models.

The floorpan has a hump on the right side so the transfer case can fit.

The front differential is mounted on the right (passenger) side of the vehicle next to the engine and has an intermediate shaft that goes through the oil pan and connects to the left axle shaft (the right shaft connects right to the differential).

The front struts have a lower "fork" which connects to AWD-specific knuckles and the fork allows the axle shaft to go through it to connect to the center of the wheel


The front brake set-up (shows my current rotors - drilled/slotted R1Concepts) :




The front diff, oil pan, intermediate shaft :




The AWD front suspension:


(ignore my leaking CV boot )


The transfer case :

Gabe is offline   Reply With Quote
 

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump