Welcome to the LX Forum - Dodge Charger | Dodge Challenger | Dodge Magnum | Chrysler 300 Forum.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

<<<<<< Register to remove these ads >>>>>>


Go Back   LX Forum - Dodge Charger | Dodge Challenger | Dodge Magnum | Chrysler 300 Forum > LX Forum - General Information > Detailing

Detailing Discuss your how to's and tips on keeping your ride car show ready.


Reply
 
Thread Tools Display Modes
Old 03-15-2010, 09:42 PM   #1
 
Chargerdad's Avatar
Chargerdad
Junior Member
 
Join Date: Feb 2010
Posts: 6

Default My Pre-Show Routine
WOW... I'm the first one to drop a thread here?

OK, so I haven't actually done this in the last 12 months, but I plan to make at least one show this coming year, so here's how I get MY ride ready.

1. As soon as it gets in the 50s here in Boston, I do my initial wash/wax. If it's the first wash of the year, I wash with original scent Dawn. This is a thorough cleaning that will also strip some of the old wax off. I won't wash with Dawn again until the first time next year. I get every part of the car, door jambs, trunk, engine bay. Everytime after this I use a good car wash detergent that won't strip the wax.

2. Clay bar everything with an appropriate lubricating liquid. That could be the store bought stuff or just clear water with a touch of liquid car wash detergent. I don't clay bar every time. Maybe 2-3 times per season.

3. Wash again, this time with a good car wash detergent, to get the clay bar residue off the car.

4. Dry the car, I use a synthetic chamois. As long as you've clay barred the car well and you're gentle you won't have to worry about micro-scratches. Still some people use blowers or gel blades to do this.

5. If I see a lot of swirl marks I'll use a polish, I'm a Zaino guy so I use the Z-PC polish

6. Then I start waxing the car with Z-5 Pro including the ZFX accelerant. This helps the wax cure faster so that I can get 2-3 coats of wax on in the same day. After this, I may use the Z-5 wax 2-3 times in the season, in between I use the Z-6 Detail spray

6. While each coat dries I move to the inside of the car, vacuuming, cleaning the leather, and cleaning the windows with Invisible Glass. (Safe for tint)

7. After 2-3 coats of Z-5, I go over the whole car with Z-6 detail spray. The car looks like a mirror at this point.

8. For the chrome exhaust and some engine components I use Nevr-Dull, a wadding impregnated with mineral spirits and other "magic stuff" that leaves the chrome super shiny.

9. Speaking of the engine bay, I get that too, using Nevr-Dull, any blackening product for hoses & plastic pieces. My buddy BOS/SRT gave me some engine cleaning solution that I'm trying out now, so I'll let y'all know how that works out.

10. On to the wheels. I have custom-finished Cragar rims done in a cool black chrome and I make sure they turn heads. I take each wheel off the car (and carefully wash the wheel well, careful not to splash the car) and wash the wheels in the car wash solution. Dry them with a microfiber towel, then wax them inside & out with a good wheel wax. Before putting them back on the car I hit them with some tire shine. I've been using Meguire's Hot Shine and I love it.

All of this can be done in one day, a very long day but still I can get it done for a late night show. If I don't have that time, I"ll do the car the day before a show, and do the inside, engine, and wheels on the day of the show. Then when I get to the show I'll give it a quick Z-6 detail to make it look great.

The results...




So that's me. What do you guys do?


__________________

'06 R/T "Raven"
Mods: SRT hood, Custom 3" Magnaflow catback, Airraid II intake, KW VI's with a 2" drop, SSBC front brakes,
Custom powder-coated Black Chrome 20" Cragars, 35% tint, Mopower spoiler, re-badged.

Last edited by Chargerdad; 03-15-2010 at 09:49 PM.
Chargerdad is offline   Reply With Quote
Old 03-16-2010, 09:54 AM   #2
 
BOS/SRT's Avatar
BOS/SRT
Administrator
 
Join Date: Feb 2010
Location: Boston
Name: Jimmy
Posts: 601

Car Model: Dodge Charger SRT8
Year: 2006
Engine: 6.1L HEMI
Default
Jerry, you must have had your hands all over her, she looks all wet, lol. Sweet job on the detailing and how to. Thanks bro!

Btw, never thought of using dawn on paint to strip off wax. i'll have to give it a try. I'm also interested on your thoughts of bnd's block cleaner.


__________________
Jimmy - BRIGHT SILVER METALLIC SRT8 I,II,III
2toned Flat Black Vinyl,CarbonbyDesign,Billet Tech Designer,Razor Edge,SpeedLogix,KW v2,Predator 91 tune,22" 3 pc Covet Forged Wheels ,Nitto 420s,BWoody Sway ends,Hotchkis sways,Magnaflow highflow/c-back,DMH electric cutouts,22elite,BND ALL Quantum Blue/ACESIV,Killerglass,GSM intake,Danko v2 spoiler/Chin spoiler,Grip Rockers,Neffywrap
BOS/SRT is offline   Reply With Quote
Old 03-17-2010, 12:31 PM   #3
 
Chargerdad's Avatar
Chargerdad
Junior Member
 
Join Date: Feb 2010
Posts: 6

Default
Originally Posted by BOS/SRT View Post
Jerry, you must have had your hands all over her, she looks all wet, lol.
Its all in the technique bro. You should see how wet she gets when I wad her exhaust. lol


__________________

'06 R/T "Raven"
Mods: SRT hood, Custom 3" Magnaflow catback, Airraid II intake, KW VI's with a 2" drop, SSBC front brakes,
Custom powder-coated Black Chrome 20" Cragars, 35% tint, Mopower spoiler, re-badged.
Chargerdad is offline   Reply With Quote
Old 03-17-2010, 05:19 PM   #4
 
BOS/SRT's Avatar
BOS/SRT
Administrator
 
Join Date: Feb 2010
Location: Boston
Name: Jimmy
Posts: 601

Car Model: Dodge Charger SRT8
Year: 2006
Engine: 6.1L HEMI
Default
Now your worrying me, lol. Don't know if I'd mention cleaning tail pipes, rofl.


__________________
Jimmy - BRIGHT SILVER METALLIC SRT8 I,II,III
2toned Flat Black Vinyl,CarbonbyDesign,Billet Tech Designer,Razor Edge,SpeedLogix,KW v2,Predator 91 tune,22" 3 pc Covet Forged Wheels ,Nitto 420s,BWoody Sway ends,Hotchkis sways,Magnaflow highflow/c-back,DMH electric cutouts,22elite,BND ALL Quantum Blue/ACESIV,Killerglass,GSM intake,Danko v2 spoiler/Chin spoiler,Grip Rockers,Neffywrap
BOS/SRT is offline   Reply With Quote
Old 03-22-2010, 07:03 PM   #5
szamojski
Junior Member
 
Join Date: Mar 2010
Location: Thunder Bay, Ontario, CAN
Age: 57
Posts: 7

Default
Nice routine. Going to have to try your procedure this summer. Thanks for th write up.
szamojski is offline   Reply With Quote
Old 03-29-2010, 01:54 AM   #6
 
Shaggy's Avatar
Shaggy
Administrator
 
Join Date: Jan 2010
Location: Arizona
Name: Bryan
Age: 47
Posts: 248

Car Model: --
Year: --
Engine: --
Default
How many times do you put her in a show?
Shaggy is offline   Reply With Quote
Old 03-31-2010, 06:18 PM   #7
 
Chargerdad's Avatar
Chargerdad
Junior Member
 
Join Date: Feb 2010
Posts: 6

Default
Originally Posted by Shaggy View Post
How many times do you put her in a show?
Much more often when I first bought her. Maybe 6 that first year? I didn't do anything last year, waaaay busy. But I want to get to 2-3 this year. BOS/SRT knows some of the work I want to do in the engine bay before I'll take her out


__________________

'06 R/T "Raven"
Mods: SRT hood, Custom 3" Magnaflow catback, Airraid II intake, KW VI's with a 2" drop, SSBC front brakes,
Custom powder-coated Black Chrome 20" Cragars, 35% tint, Mopower spoiler, re-badged.
Chargerdad is offline   Reply With Quote
Old 01-07-2011, 04:18 PM   #8
Vito99
Junior Member
 
Join Date: Jan 2011
Location: Boston
Name: Vito
Age: 32
Posts: 15

Car Model: Charger SRT-8
Year: 2006
Engine: 6.1L V8 Hemi
Default
Cool write up man .....some good techniques and info

have you ever used the blackbox?? by turtle wax...the thing works wonders after a nice claybar
Vito99 is offline   Reply With Quote
Old 01-09-2011, 05:44 PM   #9
 
Panther's Avatar
Panther
Member
 
Join Date: Nov 2010
Location: DFW, TX
Name: Mike
Age: 53
Posts: 30

Car Model: Dodge Charger
Year: 2006
Engine: 5.7
Default
not familier with the clay bar. Please explain this
Panther is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump