Welcome to the LX Forum - Dodge Charger | Dodge Challenger | Dodge Magnum | Chrysler 300 Forum. |
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
<<<<<< Register to remove these ads >>>>>>
|
|
04-02-2010, 10:53 AM
|
#1
|
Member
Join Date: Feb 2010
Location: Dudley, MA
Name: Jason
Age: 45
Posts: 56
Car Model: Charger Superbee
Year: 2007
Engine: 6.1L HEMI
|
Centric Posi Quiets
FINALLY I swapped out my Brembo's, which had at least half of their life left, for the Centric Posi Quiets I've had for a year or so. So far I haven't felt much difference in stopping power but I haven't done any more then around town driving since. The lack of brake dust looks promising.
I do have a question though, on the original brake pads there was a thin metal plate on the back of the rear pads that the new pads didn't have. While were doing this, the dealerships head mechanic showed up so we asked him about the plates. He said they were a type of noise reducer and recommended putting them on the new pads. Can anyone confirm this??
Thanks!
|
__________________
07 Superbee #896
Mods: Diablo Predator 93 Oct tune | 180 T-Stat | Centric Posi Quiets | Superbee Valve Stem Caps
Mods to come: Some sort of CAI eventually.
|
|
|
04-03-2010, 01:47 AM
|
#2
|
Administrator
Join Date: Feb 2010
Location: Boston
Name: Jimmy
Posts: 601
Car Model: Dodge Charger SRT8
Year: 2006
Engine: 6.1L HEMI
|
congrats, been running posi's for 2 years now and have loved the difference in brake dust reduction. it doesn't get rid of it, but it is far less. i did notice slightly stopping power, but nothing to noticeable.
your mechanic is correct, at least that's what i was told as well. i didn't use mine and no issues.
|
__________________
Jimmy - BRIGHT SILVER METALLIC SRT8 I,II,III 2toned Flat Black Vinyl,CarbonbyDesign,Billet Tech Designer,Razor Edge,SpeedLogix,KW v2,Predator 91 tune,22" 3 pc Covet Forged Wheels ,Nitto 420s,BWoody Sway ends,Hotchkis sways,Magnaflow highflow/c-back,DMH electric cutouts,22elite,BND ALL Quantum Blue/ACESIV,Killerglass,GSM intake,Danko v2 spoiler/Chin spoiler,Grip Rockers,Neffywrap
|
|
|
04-03-2010, 06:56 PM
|
#3
|
Member
Join Date: Feb 2010
Location: Dudley, MA
Name: Jason
Age: 45
Posts: 56
Car Model: Charger Superbee
Year: 2007
Engine: 6.1L HEMI
|
Thanks Jimmy! Good to know he wasn't just pulling that out of his a$$. I followed the bedding procedure this morning and may do it again in a couple of weeks. I heard if you don't change the rotors a second bedding will help shape the pads to the rotors. We'll see if I feel a difference.
|
__________________
07 Superbee #896
Mods: Diablo Predator 93 Oct tune | 180 T-Stat | Centric Posi Quiets | Superbee Valve Stem Caps
Mods to come: Some sort of CAI eventually.
|
|
|
12-04-2010, 07:01 PM
|
#4
|
Member
Join Date: Feb 2010
Location: Dudley, MA
Name: Jason
Age: 45
Posts: 56
Car Model: Charger Superbee
Year: 2007
Engine: 6.1L HEMI
|
8 months later and still liking the Centric's. I think stopping power is a bit diminished over the stock pads but not enough to be an issue. It still stops better then either of my other two vehicles.
|
__________________
07 Superbee #896
Mods: Diablo Predator 93 Oct tune | 180 T-Stat | Centric Posi Quiets | Superbee Valve Stem Caps
Mods to come: Some sort of CAI eventually.
|
|
|
12-04-2010, 08:28 PM
|
#5
|
Member
Join Date: Oct 2010
Location: Mass
Name: Dan
Age: 41
Posts: 99
Car Model: Dodge Charger R/T Daytona
Year: 2007
Engine: 5.7
|
I just ordered up some slotted rotors & posi-quiet pads from R1concepts the other day. I'll do anything to shake this brake squeal I've got now.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|