[Abl2Fly]

My SuperBee is going to HRS this Oct to be stripped down. We are startting by removing the body from the frame 1 for easier access to the drivetrain and 2 to add some support to stiffen it up. Full subframe connectors are being welded in as well. I have a (seasoned) 6.1 block being turned into a 426 stroker with one off heads and cam being machined just for this build. The tranny is being given some love and a 2800 stall, the rear is a Taylor Racing 373 LSD gear drive, with new drive and half shafts / hubs ect. Adding drive shaft and half shaft loops will be installed. A five gallon fuel cell with be installed in the trunk opposite my DEI cryogenic intercooler / fuel rail set up. The Techo will get rebuilt and fitted with a 10lb pully. API will be diong alot of the motor build and Karl will be tuning the car. Crager steel wheels and Nitto drag radials will be the gummi bears at the track. There will be some powder coating under the hood and a few parts anodized to add some pop, the exhaust tips are being powder coated flat black. A new wings west roofline spoiler will replace the current one, and neffywrap will adorn the interior. All in all it should be alot of fun I will post pics as the build gets underway and build sheet and dyno #'s as well.